 |
 |
Contact
Info
Phone: 770-786-8473
Fax: 770-786-6995
Email |
|
 |
|
 |
Trust us
for Reliability
"There are no bargains; only the voluntary sacrificial loss
of performance and protection." - Unknown |
|
 |
|
|
 |
 |
 |
 |
|
 |
|
 |
Automatic Lubrication Equipment |
Our centralized automatic lubrication equipment
is PLC based to allow maximum control capability. All systems are
equipped with battery backup to ensure reliability.
Each automatic lubrication system offers unique
features that allow easy operation, easy programming, easy
maintenance, and reliable performance. Generous supply tanks are
easy to fill and completely eliminate the mess and safety hazard
of climbing ladders to fill reservoirs that are located above the
conveyor.
Systems are available to meet
every need:
LS-EZLUBE

LS-280

LS-300

Automatic lubrication Equipment
Model |
Features |
Specifications |
LS-EZLUBE |
This system
utilizes 4 lubricating circuits with the capacity to lubricate
4 separate lube points with control from one central location
Ability to lubricate chains in fractional
increments
Able to compensate automatically for changes
in conveyor line speed (Line speed is calculated in feet per
minute)
LED and Audible Alarm Capabilities |
Pump Motor: 115
VAC, 6 AMP, 60 HZ, 1/4 HP, 1725 RPM, TEFC with thermal
overload protection Pump: 2.4 GPM
Rotary Vane
PLC: Koyo
Interface: EZText
Operating Pressure: Preset at 25 PSI (varies
according to application)
Capacity: 4 lube circuits, 18-gallon
reservoir (can be increased to 50-gallon) |
LS-280 |
This system
utilizes up to 30 lubricating circuits with the capacity to
lubricate up to 30 separate lube points in any combination
Ability to lubricate chains in fractional
increments with control from one centralized location
Input/output capacity increase available
with the addition of expansion units |
Pump Motor: 115
VAC, 6 AMP, 60 HZ, 1/4 HP, 1725 RPM, TEFC with thermal
overload protection Pump: 2.4 GPM
Rotary Vane
PLC: Koyo
Operating Pressure: Preset at 20 PSI (varies
according to application)
Capacity: Up to 30 lube circuits, 50-gallon
reservoir |
LS-300 |
This system
utilizes up to 32 lubricating circuits with the capacity to
lubricate up to 32 separate lube points in any combination
Ability to lubricate chains in fractional
increments with control from one centralized location
Input/output capacity increase available
with the addition of expansion units |
Pump Motor: 115
VAC, 6 AMP, 60 HZ, 1/4 HP, 1725 RPM, TEFC with thermal
overload protection Pump: 2.4 GPM
Rotary Vane
PLC: Allen-Bradley
Operating Pressure: Preset at 20 PSI (varies
according to application)
Capacity: Up to 32 lube circuits, 50-gallon
reservoir |

|
|
 |
|
 |
|